Bejelentkezés
BEJELENTKEZÉS

Hungary
  • Česky
  • Slovenština
  • English
  • Polski
  • USA
HUF
0
0 Üres kosár
Components Hard drives (HDD and SSD) NVMe U.2 Intel 3DXPoint P4800X 750G NVMePCIe3.0 2.5" 15mm 60DWPD - SSDPE21M750GA

Intel 3DXPoint P4800X 750G NVMePCIe3.0 2.5" 15mm 60DWPD - SSDPE21M750GA

Kapacitás: 750 GB Gyűjtősín: PCI-E 3.0 4x Formátum: U.2 Gyorsaság: 2500 MBps (olvasás) / 2200 MBps (írás) Élettartam: 60 DWPD Technológia: 3D XPoint

Több darab vásárlás esetén egyedi B2B ajánlat kérhető.

termékkód 225.158219
Part number SSDPE21M750GA
Supermicro Part No. HDS-IUN0-SSDPE21M750GAX
Gyártó Intel
Elérhetőség A beszállítónál készleten
Garancia (hónap) 60 hónap
Súly 0.4 kg
Az ár tartalmazza az összes törvényes díjat
666 952,00 HUF ÁFA nélkül
847 029,04 HUF ÁFÁ-val
db

Részletes információk

Characteristics

SSDs, or disks with flash memories don't yet reach such high capacities as traditional HDDs. Their undeniable advantages are however their high read/write speed and lower latency. Their lifetimes are basically equal to those of traditional hard drives nowadays, however, it's important to choose the correct key DWPD value (no. of rewrites of the total capacity of the disk within one day).

Interface

When choosing a hard drive it's important to consider the choice of SATA, SAS, or NVMe disks. SATA and SAS disks are intended for both HDDs and SSDs and differ in their theoretical transfer speeds. NVMe disks are flash-based only and as such reach much higher read/write numbers and are also characterized by their very low latency.

Speed and Capacity

A key parameter in terms of hard drives is their RPM, which ranges between 5400 and 15000. This directly influences the speed of the drive and with that, its price. Today, more and more HDDs are being replaced by SSD solutions. SSDs are many times faster and their prices are starting to get closer to those of traditional HDDs. Their access times are also often faster and there's no wear when reading from the flash memory. The newest standard, NVMe, increases the quality of disks with flash memories even more and more hard drive manufacturers are starting to use it.

Product Specifications

Performance Specifications

Sequential Bandwidth - 100% Read (up to)

2500  MB/s

Sequential Bandwidth - 100% Write (up to)

2200  MB/s

Random Read (100% Span)

550000 IOPS (4K Blocks)

Random Write (100% Span)

550000 IOPS (4K Blocks)

Power - Active

18 W

Power - Idle

6 W

   

Reliability

Vibration - Operating

2.17 GRMS

Vibration - Non-Operating

3.13 GRMS

Shock (Operating and Non-Operating)

1000 G/0.5 msec

Operating Temperature Range

0°C to 70°C

Operating Temperature (Maximum)

70 °C

Operating Temperature (Minimum)

0 °C

Endurance Rating (Lifetime Writes)

41.0 PBW (30DWPD) |  82.0 PBW (60DWPD)

Mean Time Between Failures (MTBF)

2 million hours

Uncorrectable Bit Error Rate (UBER)

1 sector per 10^17 bits read

Warranty Period

5  yrs

   

Supplemental Information

Product Brief

View now

   

Package Specifications

Form Factor

U.2 15mm

Interface

PCIe 3.0 x4 |  NVMe

   

Advanced Technologies

Enhanced Power Loss Data Protection

Yes

Hardware Encryption

AES 256 bit

High Endurance Technology (HET)

Yes

Temperature Monitoring and Logging

Yes

End-to-End Data Protection

Yes

Intel® Smart Response Technology

No

Intel® Rapid Start Technology

No

Intel® Remote Secure Erase

No

Paraméterek

Lemezformátum U.2
Kapacitás GB-ban 750
Olvasási sebesség 2500
Írási sebesség 2200
DWPD 60
Gyűjtősín PCI-E 3.0 4x

Az ár alakulása



Hasonló termékek

Intel DC P4510 4TB NVMe PCIe 3.0 3D TLC 2. ...

Kapacitás: 4000 Gyűjtősín: NVMe Formátum: 2,5 Gyorsaság: 3000 MBps (olvasás) / 2900 MBps (írás) Élettartam: 1 DWPD Technológia: TLC
144 911,00 HUF ÁFA nélkül
184 036,97 HUF ÁFÁ-val
Raktáron
Készlet és szállítási lehetőségek
Személyes átvétel - Prága
Hétfő 6. 5. legkésőbb Szerda 8. 5.
Személyes átvétel - Rožnov pod Radhoštěm
Péntek 3. 5. legkésőbb Kedd 7. 5.
Futár Prága
Hétfő 6. 5. legkésőbb Szerda 8. 5.
Csehországon belüli fuvarcégek
Hétfő 6. 5. legkésőbb Szerda 8. 5.
Európai fuvarcégek
Kedd 7. 5. legkésőbb Csütörtök 9. 5.

Micron 9300 PRO 7.6TB NVMe PCIe 3.0 3D TLC ...

Kapacitás: 7600 Gyűjtősín: PCI-E 3.0 4x Formátum: 2,5 Gyorsaság: 3500 MBps (olvasás) / 3500 MBps (írás) Élettartam: 1 DWPD Technológia: 3D TLC NAND
371 216,00 HUF ÁFA nélkül
471 444,32 HUF ÁFÁ-val
A beszállítónál készleten
Készlet és szállítási lehetőségek
Személyes átvétel - Prága
Szerda 1. 5. legkésőbb Hétfő 6. 5.
Személyes átvétel - Rožnov pod Radhoštěm
Péntek 3. 5. legkésőbb Kedd 7. 5.
Csehországon belüli fuvarcégek
Szerda 1. 5. legkésőbb Hétfő 6. 5.
Európai fuvarcégek
Péntek 3. 5. legkésőbb Kedd 7. 5.
  1. Az egyetlen Supermicro integrátor Csehországban
  2. Személyes megközelítes és testreszabott szerverek
  3. NBD on-site garancia
  4. Hosting, VPS és IT infrastruktura
  5. Pre-sales & After-sales támogatás

 

Árukereső.hu Árukereső.hu
 


Change geographic locations?

Based on your location we recommend switching to our US site to receive better prices for goods and shipping as well as faster shipping.

1