Intel DC P4510 1TB NVMe PCIe 3.0 3D TLC 2.5" 15mm 1DWPD, FW VDV10131 - SSDPE2KX010T801
Kapacitás: 1000 GB Gyűjtősín: NVMe Formátum: 2,5 Gyorsaság: 2850 MBps (olvasás) / 1100 MBps (írás) Élettartam: 1 DWPD Technológia: TLC
Több darab vásárlás esetén egyedi B2B ajánlat kérhető.
termékkód | 225.153115 |
---|---|
Part number | SSDPE2KX010T801 |
Alternatív Part No. | SSDPE2KX010T8 |
Supermicro Part No. | HDS-IUN2-SSDPE2KX010T8 |
Gyártó | Intel |
Elérhetőség | A beszállítónál készleten |
Garancia (hónap) | 60 hónap |
Súly | 0.2 kg |
Az ár tartalmazza az összes törvényes díjat |
Részletes információk
Characteristics
SSDs, or disks with flash memories don't yet reach such high capacities as traditional HDDs. Their undeniable advantages are however their high read/write speed and lower latency. Their lifetimes are basically equal to those of traditional hard drives nowadays, however, it's important to choose the correct key DWPD value (no. of rewrites of the total capacity of the disk within one day).
Interface
When choosing a hard drive it's important to consider the choice of SATA, SAS, or NVMe disks. SATA and SAS disks are intended for both HDDs and SSDs and differ in their theoretical transfer speeds. NVMe disks are flash-based only and as such reach much higher read/write numbers and are also characterized by their very low latency.
Speed and Capacity
A key parameter in terms of hard drives is their RPM, which ranges between 5400 and 15000. This directly influences the speed of the drive and with that, its price. Today, more and more HDDs are being replaced by SSD solutions. SSDs are many times faster and their prices are starting to get closer to those of traditional HDDs. Their access times are also often faster and there's no wear when reading from the flash memory. The newest standard, NVMe, increases the quality of disks with flash memories even more and more hard drive manufacturers are starting to use it.
Product Specifications
Performance
- Sequential Read (up to) 3200 MB/s
- Sequential Write (up to) 2100 MB/s
- Random Read (100% Span) 620000 IOPS
- Random Write (100% Span) 200000 IOPS
- Latency - Read 77 µs
- Latency - Write 18 µs
- Power - Active 13.3W
- Power - Idle 5W
Reliability
- Shock (Operating and Non-Operating) 1000G
- Endurance Rating (Lifetime Writes) 12.25PBW
- Mean Time Between Failures (MTBF) 2 million hours
- Uncorrectable Bit Error Rate (UBER) 1 sector per 10^-17 bits read
- Warranty Period 5 yrs
Package Specifications
- Weight 139g
- Form Factor U.2 15mm
- Interface PCIe NVMe 3.1 x4
Advanced Technologies
- Enhanced Power Loss Data Protection Yes
- Hardware Encryption AES 256 bit
- High Endurance Technology (HET) Yes
- Temperature Monitoring and Logging Yes
- End-to-End Data Protection Yes
Paraméterek
Gyűjtősín | PCI-E 3.1 4x |
---|---|
Lemezformátum | 2,5" |
Kapacitás GB-ban | 1000 |
Olvasási sebesség | 2850 |
Írási sebesség | 1100 |
DWPD | 1 |