Supermicro AS -4124GS-TNR
1.Supports up to 8 double-width GPUs Direct connect for maximum performance 2.Dual AMD EPYC™ 7002 Series Processors 3.8TB Registered ECC DDR4 3200MHz SDRAM in 32 DIMMs 4.9 PCI-E 4.0 x16 (Option: 10 PCI-E 4.0 x16 slots without NVMe devices) 5.Up to 24 Hot-swap 2.5" drive bays; 4x 2.5" SATA drives and 4x 2.5" NVMe drives supported with included H/W* (*Depends on PCI-E quantity based on #4) 6.2 GbE LAN ports (rear) 7.8 Hot-swap 11.5K RPM cooling fans 8.2000W (2+2) Redundant Power Supplies Titanium Level (96%+)
TIER III minősítésű adatközpontunkban most fél évre ingyenesen bérelhet tárhelyet.
De nem csak ez - kérjen tőlünk egyedi szerverkonfigurációt! Mi megtervezzük, összeállítjuk, szakértő módon telepítjük és kiterjesztett vagy NBD garanciát biztosítunk.
| termékkód | 202.155169 |
|---|---|
| Part number | AS -4124GS-TNR |
| EAN | 672042404070 |
| Gyártó | Supermicro |
| Elérhetőség |
Raktáron 0 db
Készlet és szállítási lehetőségek
Személyes átvétel - Prága Péntek 26. 4. legkésőbb Vasárnap 28. 4. Személyes átvétel - Rožnov pod Radhoštěm Csütörtök 25. 4. legkésőbb Hétfő 29. 4. Futár Prága Péntek 26. 4. legkésőbb Vasárnap 28. 4. Csehországon belüli fuvarcégek Péntek 26. 4. legkésőbb Vasárnap 28. 4. Európai fuvarcégek Hétfő 29. 4. legkésőbb Szerda 1. 5. |
| Külső raktár | Raktáron 1 db |
| Garancia (hónap) | 24 hónap |
| Súly | 26.76 kg |
| Az ár tartalmazza az összes törvényes díjat | |
Részletes információk
Complete System Only: To maintain quality and integrity, this product is sold only as a completely-assembled system (for optimal performance 16 DIMMs is recommended). Minimum requirement is 2 CPUs, 2 GPUs, 4 DIMMs per CPU with EPYC 7003 Series, 2 SATA or 1 NVMe.
| Motherboard | |
 |
|
Super H12DSG-O-CPU |
| Processor/Cache | |
|
|
| CPU |
|
| Cores |
|
| Note | * Supports 2 CPUs only – single socket not supported ** Certain CPUs with high TDP may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization |
| GPU | |
|
|
| Supported GPUs |
|
| CPU-GPU Interconnect |
|
| GPU-GPU Interconnect |
|
| System Memory | |
|
|
| Memory Capacity |
|
| Memory Type |
|
| Note | * Minimum 4 DIMMs per CPU required with EPYC 7003 Series processors |
| On-Board Devices | |
|
|
| Chipset |
|
| SATA |
|
| Network Controllers |
|
| IPMI |
|
| Graphics |
|
| Input / Output | |
|
|
| SATA/SAS |
|
| LAN |
|
| USB |
|
| Video |
|
| COM Port |
|
| System BIOS | |
|
|
| BIOS Type |
|
| Management | |
|
|
| Software |
|
| PC Health Monitoring | |
|
|
| CPU |
|
| FAN |
|
| Temperature |
|
| Chassis | |
|
|
| Form Factor |
|
| Model |
|
| Dimensions | |
|
|
| Height |
|
| Width |
|
| Depth |
|
| Package |
|
| Weight |
|
| Available Colors |
|
| Drive Bays / Storage | |
|
|
| Hot-swap |
|
| Note | * 2x drives in RAID 1 only via onboard Marvell 9230 |
| Expansion Slots | |
|
|
| PCI-Express |
|
| System Cooling | |
|
|
| Fans |
|
| Power Supply | |
| 2000W Redundant Power Supplies with PMBus | |
| Total Output Power |
|
| Dimension (W x H x L) |
|
| Input |
|
| +12V |
|
| 12Vsb |
|
| Output Type |
|
| Certification |   Titanium Level[ Test Report ] |
| Operating Environment | ||
|
||
| RoHS |
|
|
| Environmental Spec. |
|
|
 |
|||
| Parts List - (Items Included) | |||
|
|||
|
Part Number |
Qty |
Description |
| Motherboard / Chassis | MBD-H12DSG-O-CPU
|
1
|
Super H12DSG-O-CPU Motherboard
|
| Add-on Card / Module | AOM-PCIE4-418N-1-P | 1 | GPU board for 4U PCIE GPU system,HF |
| Add-on Card / Module | AOM-PIO-I2G | 1 | AOM-PIO-I2G |
| Backplane | BPN-SAS3-216A-N4 | 1 | 24-port 2U SAS3 12Gbps hybrid backplane, support up to 20x 2.5-inch SAS3/SATA3 HDD/SSD and 4x SAS3/SATA3/NVMe Storage Devices |
| Cable 1 | CBL-0010L | 1 | 9 PIN SERIAL PORT DTK CABLE, LF |
| Cable 2 | CBL-0234L | 2 | Y CABLE FOR 4-PIN HDD |
| Cable 3 | CBL-0449L | 2 | HDD power extension for X8OBN, special 8pin to 4 HDD |
| Cable 4 | CBL-PWCD-0900 | 4 | PWCD,US/EU/Canada/China/Australia,IEC60320 C14 TO C13,4FT,17 |
| Cable 5 | CBL-PWEX-1028 | 8 | GPU,2x4F/CPU to 2x4F/CPU,P4.2, 30CM,16AWG, 10A/pin, -40~105C |
| Cable 6 | CBL-PWEX-1080 | 1 | Mini-Fit 2x2 F, to Mini-Fit 2x2 F, 10A/pin,7cm,16AWG,RoH |
| Cable 7 | CBL-SAST-0826 | 2 | SLIMLINE SAS x8 (LE) to 2x MINI SAS HD,INT, 70CM,32AWG, |
| Cable 8 | CBL-SAST-122EF-85 | 8 | Slimline x8 (STR) to Slimline x8 (STR),FFC,INT,20/25CM, |
| Cable 9 | CBL-SAST-1267-85 | 2 | Slimline x8 (STR) to Slimline x8 (STR),INT,67CM,85 OHM, |
| Cable 10 | CBL-SAST-1295-100 | 1 | Slimline x4 (STR) to MiniSAS HD x4 (STR),INT,95CM,RoHS |
| Drive Tray(s) | MCP-220-00047-0B | 20 | Black gen 3rd hot-swap 2.5inch HDD tray |
| Drive Tray(s) | MCP-220-00167-0B | 4 | Gen 3 2.5-inch Tool-less NVMe drive tray (clip design),RoHS |
| Heatsink / Retention | SNK-P0064AP4 | 2 | 4U Active CPU Heat Sink for AMD Socket SP3 Platform |
| *Power Supply | PWS-2K08A-1R | 4 | 1U 2000W 100-240VAC Titanium Ultra power supply 73.5x40x203mm |
| *Cable 11 | CBL-0071L | 1 | ROUND 16 TO 16 PIN RIBBON FP CABLE 30"L, LF |
| *Cable 12 | CBL-OTHR-0794 | 1 | VGA,DB 15pin,F to 2x8,PH2.54,10CM,30 AWG,RoHS |
| *Cable 13 | CBL-PWEX-1069 | 8 | PWEX,FAN,1X4/P2.5 TO 1X4/P2.54,30CM,22AWG,5A/pin,RoHS |
| *FAN 1 | FAN-0199L4-1 | 8 | 92x92x38 mm, 11.5K RPM Cooling fan w/ 5A Fan Connector,RoHS |
| *Front Panel | FPB-TMP-002 | 1 | Thermal Sensor board with 40cm I2C cable |
| *Drive Tray(s) | MCP-220-21602-0B | 3 | Black 2.5"; HDD dummy cover for SC213,216 (8 HDD Hex hole) |
| *Rear Window | MCP-240-84802-0N | 1 | 21 slot rear window for SC418X |
| *Parts | MCP-260-41802-0N | 1 | IO shield for X12DPG-OA in SC418G |
| *Front Panel | MCP-280-82601-0N | 1 | Front control board adapter (TB826) for SC216,826,936,846 |
| *Rail Set | MCP-290-00057-0N | 1 set | Rail set, quick/quick, default for 4U 17.2"; W |
| *Rail Set | MCP-290-00060-0N | 1 | Threaded rail adapter default for round hole rack |
| *Rail Set | MCP-290-00115-0N | 1 | Inner rail, quick-release type |
| *Rail Set | MCP-290-00117-0N | 1 | Outer rail, quick-release type |
| Software | SFT-OOB-LIC • | 1 | OOB Management Package (per node license) |
Notes:
|
|||
|
|||
| Optional Parts List | |||
|
|||
| Part Number | Qty | Description | |
| 0.5U LID | MCP-230-41803-0N | 1 | Top cover for GTX card support |
| 1U LID | MCP-230-41806-0N | 1 | Top cover for NVLINK BRIDGE support |
| GPU Cables | CBL-PWEX-1017 | 1 per GPU | GPU power cable (for NVIDIA QUADRO, GTX, AMD Instinct). 8pin FEMALE CPU BLUE to 2x 6pin FEMALE / 2x 1pin FEMALE. 20cm 16AWG/20AWG. |
| CBL-PWEX-10401 | 1 per GPU | GPU power cable (for NVIDIA QUADRO, GTX). 8pin MALE CPU to 2x 6pin FEMALE / 2x 1pin FEMALE. 5cm 20AWG/16AWG. | |
| Note: | 1. Use with CBL-PWEX-1028 | ||
| Storage Controller Cards and Cables | AOC-S3008L-L8I2 | 1 | Broadcom 3008 STD LP 8 internal ports, 12Gb/s per port - SAS HBA Adapter Card, RAID 0,1,1E,10 |
| AOC-S3008L-L8E2 | 1 | Broadcom 3008 STD LP 8 internal ports, 12Gb/s per port - SAS HBA Adapter Card, HBA only | |
| AOC-S3108L-H8IR2 | 1 | Broadcom 3108 STD LP 8 internal ports, 12Gb/s per port - SAS HBA Adapter Card, RAID 0,1,5,6,10,50,60 | |
| AOC-S3108L-H8IR-16DD2 | 1 | Broadcom 3108 STD LP 8 internal ports, 12Gb/s per port - SAS HBA Adapter Card, RAID 0,1,5,6,10,50,60. Maximum 16 HDD support with expander backplane | |
| AOC-SAS3-9361-24I3 | 1 | 24-Port int, 12 Gb/s SAS, PCIe 3.0, 4GB DDR3 | |
| CBL-SAST-0531 | - | Internal Mini-SAS HD to Mini-SAS HD 80cm,30AWG,12Gb/s | |
| BKT-BBU-BRACKET-05 | 1 | Remote Mounting Board for Supercap. Installs in PCI-E slot. | |
| Note: | 2. Requires 2x CBL-SAST-0531 3. Requires 6x CBL-SAST-0531 |
||
| Global Services & Support | OS4HR3/2/1
|
-
|
3/2/1-year onsite 24x7x4 service
|
| Software | SFT-DCMS-Single | 1 | DataCenter Management Package (per node license) |
|
|||
Paraméterek
| PCIe teljes száma | 10 |
|---|---|
| A cpu gyártója | AMD |
| OCP/AIOM | 0 |
| Mélység mm | 833 |
| 2.5"-os meghajtóhelyek száma | 10 |
| 3.5"-os meghajtóhelyek száma | 0 |
| Merevlemezek száma | 10 |
| NVME slotok száma | 0 |
| Socket | SP3 |
| Hatékonyság tanúsítás | Titanium |
| U méret | 4 |
| Teljesítmény (W) | 3000 |
