Supermicro MBD-H11SSL-i-O

Részletes információk

Motherboards

Supermicro motherboards support the latest generation Intel and AMD processors, memories and offer the most advanced technologies in the IT field – NVMe, M.2, 10GbE network ports. Thanks to their high scalability and a wide choice of form factors, the boards can fulfill the needs of even the most demanding customers. Supermicro offers the broadest selection of servers designed for industrial use, which is reflected in the overall quality of the boards. Materials that guarantee a long lifespan are used for manufacturing Supermicro motherboards, thanks to which a minimal failure rate is achieved. Supermicro motherboards go through a generational exchange approximately once every seven years, which guarantees long support by the manufacturer. Each Supermicro motherboard also allows free installation of specialized software for basic system monitoring.

The purchase of NBD warranty of your own choice is a matter of course, which minimizes service outages even in cases that cannot be predicted. Contact our sales department for more information. Standard NBD warranties are offered for 3 or 5 years.

Product specifications

Physical Stats
Form Factor	ATX
Dimensions	12" x 9.6" (30.5cm x 24.4cm)

Processor/Chipset
CPU	Single AMD EPYC™ 7001/7002* series Processor (*Board revision 2.x required) Socket SP3
Cores	Up to 32 Cores Up to 64 Cores (Board revision 2.x required)
Chipset	System on Chip

System Memory
Memory Capacity	8 DIMM slots Supports up to 1TB Registered ECC DDR4 2666MHz SDRAM in 8 DIMMs Supports up to 2TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required) 8-channel memory bus
Memory Type	DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required)
DIMM Sizes	8GB, 16GB, 32GB, 64GB, 128GB, 256GB* (*Board revision 2.x required)
Memory Voltage	1.2V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)

On-Board Devices
SATA	SATA3 (6 Gbps)
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2500 BMC
Network Controllers	2 1GbE LAN via Intel® I210 1 Realtek RTL8211E PHY (dedicated IPMI)
VGA	ASPEED AST2500 BMC

Input / Output
SATA	16 SATA3 (6 Gbps) ports
LAN	2 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port
USB	5 USB 3.0 ports (2 rear + 2 via header + 1 Type A) 4 USB 2.0 ports (2 rear + 2 via header)
VGA	1 VGA port
Others	1 COM port (rear) 2 SATA DOM power connector 1 TPM 2.0 header

Expansion Slots
PCI-Express	3 PCI-E 3.0 x8 3 PCI-E 3.0 x16
M.2	Interface: PCI-E 3.0 x4 Form factor: 2280, 22110 Key: M-key

Chassis ( Optimized for H11SSL-i )
1U	CSE-813MFTQC-350CB2 CSE-813MFTQC-R407CB
2U	CSE-213AC-R1K23LPB SC216BE1C4-R1K23LPB CSE-825TQC-TQC-R740LPB SC826BE1C4-R1K23LPB
3U	CSE-836BE1C-R1K23B
4U	CSE-745BAC-BAC-R1K28B2 CSE-846BE1C-R1K23B

Server(s) ( with H11SSL-i )
Model(s)	AS -1013S-MTR

System BIOS
BIOS Type	AMI 128Mb SPI Flash EEPROM
BIOS Features	Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 5.1 USB Keyboard Support SMBIOS 3.1.1

Management
Software	Super Doctor 5 Watch Dog NMI SUM IPMI 2.0, KVM with dedicated LAN
Power Configurations	ACPI Power Management Power-on mode control for AC power loss recovery

PC Health Monitoring
CPU	Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +5V standby, +3.3V standby CPU switching voltage regulator Supports system management utility VBAT
FAN	Up to 7-fan status tachometer monitoring Up to 7 4-pin fan headers Dual Cooling Zone Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 7x Fan connectors I²C Temperature Sensing Logic
LED	CPU / System Overheat LED
Other Features	Chassis Intrusion Detection Chassis Intrusion Header UID

Operating Environment / Compliance
Environmental Specifications	Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)

Bulk Pack List
	Part Number	Qty	Description
H11SSL-i	MBD-H11SSL-SSL-i-B	1	H11SSL-i Motherboard
I/O Cable	CBL-0044L	2	57.5CM SATA FLAT S-S PBF
I/O Shield	MCP-260-00042-0N	1	STD I/O SHIELD FOR X9 SOCKET R SERVER MB

Retail Pack List
	Part Number	Qty	Description
H11SSL-i	MBD-H11SSL-SSL-i-O	1	H11SSL-i Motherboard
I/O Cable	CBL-0044L	6	57.5CM SATA FLAT S-S PBF
I/O Shield	MCP-260-00042-0N	1	STD I/O SHIELD FOR X9 SOCKET R SERVER MB

Optional Parts List
	Part Number	Qty	Description
I/O Cable	CBL-SAST-0699	-	MINI SAS HD-4 SATA,12G,INT,75/75/90/90CM,75CM SB,28/30AWG,Ro
TPM security module	AOM-TPM-9655V	-	TPM 1.2 module with Infineon 9655, RoHS/REACH,PBF;
	AOM-TPM-9665V	-	TPM 2.0 module with Infineon 9665, RoHS/REACH,PBF;