 |
|
|
|
 |
| SYS-2029U-TN24R4T |
- SuperServer 2029U-TN24R4T (Black)
|
| |
|
Super X11DPU |
| |
|
| CPU |
- Dual Socket P (LGA 3647)
- Intel® Xeon® Scalable Processors,
Dual UPI up to 10.4GT/s
- Support CPU TDP 70-205W
|
| Cores |
- Up to 28 Cores with Intel® HT Technology
|
| |
|
| Memory Capacity |
- 24 DIMM slots
- Up to 3TB ECC 3DS LRDIMM, 3TB ECC RDIMM, DDR4 up to 2666MHz
|
| Memory Type |
- 2666/2400/2133MHz ECC DDR4 SDRAM
- 2666 ECC DDR4 NVDIMM
|
| |
|
| Chipset |
|
| Storage |
- SATA3 (6Gbps); RAID 0, 1, 5, 10 per node
|
| Network Connectivity |
- 4x 10GBase-T ports via Intel® X550 Ethernet Controller
- 1x Realtek RTL8211E PHY (dedicated IPMI)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
|
| Graphics |
|
| |
|
| NVMe |
|
| LAN |
- 4 10GBase-T LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
| USB |
- 3 USB 3.0 ports (2 rear, 1 Type A)
|
| Video |
- 2 VGA ports (1 rear, 1 onboard)
|
| Serial Port / Header |
|
| DOM |
- 2 SuperDOM (Disk on Module) ports
|
| |
|
| BIOS Type |
|
| |
|
| Software |
- Intel® Node Manager
- Redfish API
- IPMI 2.0
- KVM with dedicated LAN
- NMI
- SSM, SPM, SUM
- SuperDoctor® 5
|
| Power Configurations |
|
| |
|
| CPU |
- Monitors for CPU Cores, Chipset Voltages, Memory.
- 4+1 Phase-switching voltage regulator
|
| FAN |
- Fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for fan connectors
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
| Width |
|
| Height |
|
| Depth |
|
| Weight |
- Net Weight: 39 lbs (17.7 kg)
- Gross Weight: 63 lbs (28.6 kg)
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power status LED
- HDD activity LED
- Network activity LEDs
- System information (overheat/UID) LED
|
| |
|
| PCI-Express |
-
- 2 PCI-E 3.0 x16 (FH, 10.5" L)
- 1 PCI-E 3.0 x8 (LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.) |
| |
|
| Hot-swap |
- 24 Hot-swap 2.5" drive bays: 24 NVMe (4 hybrid ports - SAS3 via opt. AOC)
- 2 rear Hot-swap 2.5" SATA drive bays
|
| M.2 |
- 1 M.2 NVMe (2240/2260/2280/22110)
- 1 M.2 SATA3 via optional cable CBL-SAST-0538 (2240/2260/2280/22110)
- 2 M.2 NVMe via optional add-on card AOC-SLG3-2M2 (2260/2280/22110)
|
| |
|
| Fans |
- 4 Heavy duty 8cm PWM fans
|
| |
| 1600W Redundant Power Supplies with PMBus |
| Total Output Power |
|
Dimension
(W x H x L) |
|
| Input |
- 100-127Vac / 13 - 9A / 50-60Hz
- 200-240Vac / 10 - 8A / 50-60Hz
|
| +12V |
- Max: 83.3A / Min: 0A (100-127Vac)
- Max: 133A / Min: 0A (200-240Vac)
|
| 12Vsb |
|
| Output Type |
- 25 Pairs Gold Finger Connector
|
| Certification |
  UL/cUL/CB/BSMI/CE/CCC
Titanium Level
[ Test Report ] |
| |
|
| RoHS |
|
| Environmental Spec. |
- Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F)
- Non-operating Temperature:
-40°C to 60°C (-40°F to 140°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|
 |
|
|
|
|
|
|
Part Number
|
Qty
|
Description
|
| Motherboard / Chassis |
MBD-X11DPU
CSE-219AC24-R1K62P-N24T |
1
1 |
Super X11DPU Motherboard
2U Chassis |
| Add-on Card / Module |
AOC-2UR6N4-i4XT-P |
1 |
2U Ultra Riser with 4-port 10GbE RJ45 (10GBase-T) |
| Backplane |
BPN-NVME3-216EB |
1 |
BPN-NVMe3-216A-S4 Backplane Base Board |
| Backplane |
BPN-NVME3-216EL |
2 |
PCIe Gen3x16 input to PLX9765 to support 12x NVMe port |
| Backplane |
BPN-SAS3-826TQ-B2B |
1 |
2-port 2U SAS3 12Gbps backplane, support up to 2x 2.5-inch SAS3/SATA3 HDD/SSD |
| Cable 1 |
CBL-0097L-03 |
1 |
MINI SAS-4 SATA,INT,51CM,51CM SB,30AWG |
| Cable 2 |
CBL-PWEX-0653 |
3 |
8 pin female to 4 pin female power, 37cm, 18AWG,RoHS/REACH |
| Cable 3 |
CBL-PWEX-0702 |
1 |
PWEX,2X4F/P4.2 TO 1X4F/P5.08/RA,32CM,18AWG,YEL,BLK*2,RED |
| Cable 4 |
CBL-PWEX-1008 |
2 |
BPN PWR,2x4F/CPU to 2x4F/PCIe,P4.2, 12V,40CM,16AWG, 10A/pin, 0~80C |
| Cable 5 |
CBL-SAST-0819 |
4 |
OCuLink v 1.0,INT,PCIe NVMe SSD, 65CM,34AWG,RoHS/REACH |
| Cable 6 |
CBL-SAST-0820 |
4 |
OCuLink v. 1.0,INT,PCIe NVMe SSD, 85CM,34AWG,RoHS/REACH |
| Parts |
MCP-110-00015-0N |
8 |
Pan head screw, #6-32 x 6L |
| Air Shroud |
MCP-310-82921-0N |
1 |
Plastic air shroud for SC829U, 219U (X11 24DIMM, left side) |
| Air Shroud |
MCP-310-82922-0N |
1 |
Plastic air shroud for SC829U, 219U (X11 24DIMM, right side) |
| Riser Card |
RSC-U2N4-6 |
1 |
2U Ultra Riser Card with 4 NVME and PCI-Ex16,RoHS/REACH |
| Riser Card |
RSC-UMR-8 |
1 |
1U Ultra RHS Riser Card with 1 PCIE/SATA Hybrid M.2 &1 PCIE |
| Heatsink / Retention |
SNK-P0068PS |
2 |
2U Passive CPU Heat Sink for X11 Purley Platform Equipped with a Narrow Retention Mechanism |
| Power Supply |
PWS-1K62A-1R |
2 |
AC-DC 1600W, Titanium Level, Redundancy, 1U, DC Output: +12V and +12Vs, 203 x 73.5 x 40 mm, AC Input: 90 - 264 VAC/47-63Hz, PMBus 1.2 with DSP controller,HF,RoHS/REACH |
| FAN 1 |
FAN-0158L4 |
4 |
80x80x38 mm, 10.5K RPM, Optional Middle Cooling Fan for X10 2U Ultra and HFT Series Servers,RoHS/REACH |
| Mounting Rails |
MCP-290-00053-0N-01
MCP-290-00060-0N |
1
1 |
Auto-latch, inner/outer rail set, quick-release type, 26.9" to 36.4"
Threaded rail adapter default for round hole rack |
|
|
|
