 |
 |
| SuperWorkstation |
|
| |
|
| CPU |
- LGA 1366 Socket
- Intel® Core™ i7 990X, i7-980X, i7-975 and i7-965 Extreme Edition
- Intel® Core™ i7 series
- Intel® Xeon® 5600/5500 series
- Intel® Xeon® 3600/3500 series
|
| System Bus |
|
| |
|
| Memory Capacity |
- Supports up to 24 GB 1600 / 1333 / 1066 / 800MHz DDR3 ECC / non-ECC Un-Buffered memory
- Three Channel memory bus
- 6 DIMM slots
|
| Memory Type |
- 1600 / 1333 / 1066 / 800MHz Un- Buffered ECC / non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256MB, 512MB, 1GB, 2GB, 4GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
|
| Chipset |
- Intel® X58 Express chipset
- ICH10R
|
| SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
|
| Network Controllers |
- Dual Intel® 82574L Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Audio |
- Realtek ALC883 7.1 HD audio
|
| Super I/O |
|
| Clock Generator |
|
| |
|
| PCI-Express |
- 2 (x16) PCI-E 2.0 slots
- 1 (x4) PCI-E slot (using x8 slot)
|
| PCI |
|
| |
|
| Serial ATA |
- 6 Serial ATA ports
- 6 SATA hard drives supported
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
|
| USB |
- 8x USB rear ports
- 2x USB on-board
- 1x USB internal header(2 ports)
- Total 12 USB 2.0 Compliant
|
| Audio |
- 6x analog outputs
- 1x S/PDIF digital output
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 2 Fast UART 16550 serial header
|
| IEEE 1394a |
- 2x headers
- 1x external connector
|
| |
|
| BIOS Type |
- 4Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
|
|
|
|
| Form Factor |
- 4U Rackmountable / Tower
- Optional Rackmount Kit (CSE-PT26)
|
| Model |
|
| |
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
|
| Ports |
|
| |
|
| Hot-swap |
- 6x SATA Hot-swap Drives
- 2x Spare Trays
|
| Peripheral Bay(s) [90o Rotatable] |
- 2x 5.25" Peripheral Drive Bay
- 1x 5.25" Bay For Floppy Drive
|
| |
|
| SC743 SATA Backplane w/ Enclosure Management |
| |
|
| Fans |
- 2x 8cm Hot-swappable PWM Cooling Fans
- 1x 9cm Hot-Swappable Rear Exhaust PWM Fan
- 1x Active heatsink w/ heatpipe
|
| |
|
| 865W AC power supply (cooling-redundant) w/ PFC |
| AC Voltage |
- 100 - 240V, 50-60Hz, 12-6 Amp
|
| +5V standby |
|
| +12V |
|
| +5V |
|
| +3.3V |
|
| -12V |
|
| Certification |
 Certified |
| |
|
| CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
- Total of six fan headers supporting up to 6 fans
- Six 4-pin fan headers
- 6x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- System Information LED
- Suspend-state indicator LED
- +5V Standby alert LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
| |
| Environmental Spec. |
- Operating Temperature: 10° to 35°C (50° to 95°F)
- Non-operating Temperature: -40° to 70°C (-40° to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
