 |
 |
| SYS-7047R-3RF4+ |
- SuperServer 7047R-3RF4+ (Black)
|
| |
|
Super X9DR3-LN4F+ |
| |
|
| CPU |
- Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
|
| Note |
† BIOS version 3.0 or above is required |
| Cache |
|
| System Bus |
|
| |
|
| Memory Capacity |
- 24x 240-pin DDR3 DIMM slots
- Up to 1.5TB DDR3 ECC LRDIMM
- Up to 768GB DDR3 ECC Registered memory (RDIMM)
- Up to 192GB DDR3 ECC Un-Buffered memory (UDIMM)
|
| Memory Type |
- 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
| Chipset |
|
| SATA |
- SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1, 5, 10
|
| SAS |
- SAS from C606
- RAID 0, 1, 10 support
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Winbond BMC
|
| Network Controllers |
- Intel® i350 Gigabit Ethernet Controller
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Video |
- G200 (Nuvoton WPCM450 BMC with graphic controller)
|
| Super I/O |
|
| |
|
| SATA |
- 2x SATA 3.0 ports (6Gbps)
- 4x SATA 2.0 ports (3Gbps)
|
| SAS |
|
| LAN |
- 4x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 2x Front USB 2.0 + 4x Rear USB 2.0 ports
- MB: 4x rear + 4x via header + 1x Type A
|
| Video |
|
| Serial Port / Header |
|
| |
|
| PCI-Express |
- 4x PCI-E 3.0 x16 (Full-height, Full-length)
- 1x PCI-E 3.0 x8 (Full-height, Full-length)
- 1x PCI-E 3.0 x4 (in x8)
(Full-height, Full-length)
|
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- DMI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
|
|
|
|
| Form Factor |
- 4U Rackmountable / Tower
- Optional Rackmount Kit
|
| Model |
|
| |
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power Fail LED
|
| Ports |
|
| |
|
| Hot-swap |
- 8x 3.5" Hot-swap SAS/SATA Drive Trays
|
| Peripheral Bay(s) [90oRotatable] |
- 2x 5.25" Peripheral Drive Bays
- 1x 5.25" Bay that fits 3.5" bay devices
|
| |
|
| SAS / SATA Hard Drive Backplane w/AMI MG9072 |
| |
|
| Fans |
- 3x 5000 RPM Hot-swap PWM Cooling Fans
- 2x 5000 RPM Hot-swap Rear Exhaust PWM Fans
|
| |
|
| 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C |
| AC Input |
- 100-240 V, 50-60 Hz, 11-4.5 Amp
|
| DC Output |
- 4 Amp @ +5V standby
- 75 Amp @ +12V
|
| Certification |
  Platinum Certified
[ Test Report ] |
| |
|
| CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
|
| FAN |
- Total of eight fan headers supporting up to 8 fans
- 8x fans with tachometer status monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- System info. LED:
UID indicator, fan fail/System Overheat
- Suspend static indicator LED
- UID/Remote LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
| |
|
| RoHS |
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
