Intel D3 S4520 240GB M.2 SATA 6Gb/s 3D TLC 22x80mm 2DWPD - SSDSCKKB240GZ01
Capacity: 240 GB BUS: SATAIII Format: M.2
Több darab vásárlás esetén egyedi B2B ajánlat kérhető.
| termékkód | 225.160354 |
|---|---|
| Part number | SSDSCKKB240GZ01 |
| EAN | 735858482608 |
| Alternatív Part No. | SSDSCKKB240GZ |
| Supermicro Part No. | HDS-IMT0-SSDSCKKB240GZ |
| Gyártó | Intel |
| Elérhetőség |
Raktáron 0 db
Készlet és szállítási lehetőségek
Személyes átvétel - Prága Szerda 1. 5. legkésőbb Kedd 7. 5. Személyes átvétel - Rožnov pod Radhoštěm Szerda 1. 5. legkésőbb Hétfő 6. 5. Futár Prága Szerda 1. 5. legkésőbb Kedd 7. 5. Csehországon belüli fuvarcégek Szerda 1. 5. legkésőbb Kedd 7. 5. Európai fuvarcégek Péntek 3. 5. legkésőbb Szerda 8. 5. |
| Külső raktár | Raktáron 6 db |
| Garancia (hónap) | 60 hónap |
| Súly | 0.4 kg |
| Az ár tartalmazza az összes törvényes díjat | |
Részletes információk
Characteristics
SSDs, or disks with flash memories don't yet reach such high capacities as traditional HDDs. Their undeniable advantages are however their high read/write speed and lower latency. Their lifetimes are basically equal to those of traditional hard drives nowadays, however, it's important to choose the correct key DWPD value (no. of rewrites of the total capacity of the disk within one day).
Interface
When choosing a hard drive it's important to consider the choice of SATA, SAS, or NVMe disks. SATA and SAS disks are intended for both HDDs and SSDs and differ in their theoretical transfer speeds. NVMe disks are flash-based only and as such reach much higher read/write numbers and are also characterized by their very low latency.
Speed and Capacity
A key parameter in terms of hard drives is their RPM, which ranges between 5400 and 15000. This directly influences the speed of the drive and with that, its price. Today, more and more HDDs are being replaced by SSD solutions. SSDs are many times faster and their prices are starting to get closer to those of traditional HDDs. Their access times are also often faster and there's no wear when reading from the flash memory. The newest standard, NVMe, increases the quality of disks with flash memories even more and more hard drive manufacturers are starting to use it.
Product Specifications
|
Performance Specifications |
|
|
Sequential Bandwidth - 100% Read (up to) |
500 MB/s |
|
Sequential Bandwidth - 100% Write (up to) |
190 MB/s |
|
Random Read (100% Span) |
69000 IOPS (4K Blocks) |
|
Random Write (100% Span) |
16000 IOPS (4K Blocks) |
|
Power - Active |
2.6W |
|
Power - Idle |
0.9W |
|
Reliability |
|
|
Vibration - Operating |
2.17 GRMS |
|
Vibration - Non-Operating |
3.13 GRMS |
|
Shock (Operating and Non-Operating) |
1000 G/0.5 msec |
|
Operating Temperature Range |
0°C to 70°C |
|
Operating Temperature (Maximum) |
70 °C |
|
Operating Temperature (Minimum) |
0 °C |
|
Endurance Rating (Lifetime Writes) |
0.62 PBW |
|
Mean Time Between Failures (MTBF) |
2 million hours |
|
Uncorrectable Bit Error Rate (UBER) |
1 sector per 10^17 bits read |
|
Warranty Period |
5 yrs |
|
Supplemental Information |
|
|
Additional Information |
View now |
|
Package Specifications |
|
|
Form Factor |
2.5" 7mm |
|
Interface |
SATA 3.0 6Gb/S |
|
Advanced Technologies |
|
|
Enhanced Power Loss Data Protection |
Yes |
|
Hardware Encryption |
AES 256 bit |
|
High Endurance Technology (HET) |
No |
|
Temperature Monitoring and Logging |
Yes |
|
End-to-End Data Protection |
Yes |
|
Intel® Smart Response Technology |
No |
|
Intel® Rapid Start Technology |
No |
|
Intel® Remote Secure Erase |
No |
Paraméterek
| Lemezformátum | |
|---|---|
| Kapacitás GB-ban | |
| Olvasási sebesség | |
| Írási sebesség | |
| DWPD | |
| Gyűjtősín |
