Részletes információk

End of Life product, the price is only informative, we’ve prepared this alternatives for you.

Motherboards

Supermicro motherboards support the latest generation Intel and AMD processors, memories and offer the most advanced technologies in the IT field – NVMe, M.2, 10GbE network ports. Thanks to their high scalability and a wide choice of form factors, the boards can fulfill the needs of even the most demanding customers. Supermicro offers the broadest selection of servers designed for industrial use, which is reflected in the overall quality of the boards. Materials that guarantee a long lifespan are used for manufacturing Supermicro motherboards, thanks to which a minimal failure rate is achieved. Supermicro motherboards go through a generational exchange approximately once every seven years, which guarantees long support by the manufacturer. Each Supermicro motherboard also allows free installation of specialized software for basic system monitoring.

The purchase of NBD warranty of your own choice is a matter of course, which minimizes service outages even in cases that cannot be predicted. Contact our sales department for more information. Standard NBD warranties are offered for 3 or 5 years.

Product specifications

Physical Stats
Form Factor	Micro-ATX
Dimensions	9.6" x 9.6" (24.38cm x 24.38cm)

Processor/Cache
CPU	Intel® 4th Generation Core™ i3 series, Intel® Celeron®, Intel® Pentium®v, Intel® Xeon® processor E3-1200 v3, Intel® Xeon® Processor E3-1200 v4 series. Single Socket LGA 1150 supported, CPU TDP support 85W

System Memory
Memory Capacity	Up to 32GB Unbuffered ECC UDIMM, DDR3-1600MHz, in 4 DIMM slots 4x 240-pin DDR3 DIMM sockets
Memory Type	1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	1GB, 2GB, 4GB, 8GB
Memory Voltage	1.35V, 1.5V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)

On-Board Devices
Chipset	Intel® C222 Express PCH
SATA	SATA3 (6 Gbps) ports; RAID 0,1 Intel® C222 controller for 4 SATA2 (3 Gbps) ports; RAID 0,1,5,10
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 with 10/100/1000M bps MAC
Network Controllers	Intel® Ethernet Controller I210-ATIntel® Ethernet Controller I217LMSupports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 outputRealtek RTL8211E PHY (dedicated IPMI)
Graphics	Aspeed AST2400 BMC

Input / Output
SATA	2 SATA3 (6Gbps) port 4 SATA2 (3Gbps) ports
LAN	2 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port
USB	6 USB 2.0 ports (4 rear + 2 headers) 2 USB 3.0 ports (1 header + 1 Type A)
Video Output	1 VGA port
Serial Port / Header	2 COM Ports (1 rear, 1 header)
TPM	1 TPM Header

Expansion Slots
PCI-E	1 PCI-E 3.0 x8 (in x16 slot), 1 PCI-E 3.0 x8 1 PCI-E 2.0 x4 (in x8 slot)

System BIOS
BIOS Type	128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features	DMI (SMBIOS) 2.7 ACPI 5.0 USB Keyboard support

Management
Software	IPMI2.0, NMI, SuperDoctor® III, Watchdog
Power Configurations	ACPI Power Management Main Switch Override Mechanism Power-on mode for AC power recovery Internal/External modem ring-on

PC Health Monitoring
Voltage	+12V, +3.3V, +5V, +5V standby, 5 Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V, Chipset Voltage, HT, Memory, Monitors for CPU Cores, VBAT
FAN	5x 4-pin fan headers (up to 5 fans), 5 fans with tachometer status monitoring, Low noise fan speed control, Pulse Width Modulated (PWM) fan connectors, Status monitoring for on/off control, Status monitoring for speed control, Support 3-pin fans (w/o speed control)
Temperature	Monitoring for CPU and chassis environment, CPU thermal trip support, FC temperature sensing logic, Thermal Monitor 2 (TM2) support, PECI
LED	CPU / System Overheat LED, +5V Standby alert LED
Other Features	Chassis intrusion detection, Chassis intrusion header

Operating Environment
Operating Temperature Range	0°C ~ 50°C (32°F ~ 122°F)
Non-Operating Temperature Range	-40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range	8% - 90% (non-condensing)
Non-Operating Relative Humidity Range	5% - 95% (non-condensing)

Parts List (Bulk Package)
Name	Part Number	Qty	Description
Motherboard	MBD-X10SLL-SLL-F	1	X10SLL-F Motherboard
I/O Cable 1	CBL-0044L	2	57.5 cm SATA FLAT S-S PBF
I/O Shield	MCP-260-00073-0N	1	Standard I/O shield for X9/X10 I/O MB, no EMI Gasket,RoHS/REACH,PBF
Quick Reference Guide	MNL-1428-QRG	1	X10SLL(-F)(-S)(-SF)/X10SLM-F Quick Reference Guide

 

Parts List (Retail Package)
Name	Part Number	Qty	Description
Motherboard	MBD-X10SLL-SLL-F	1	X10SLL-F Motherboard

 

Chassis (Optimized for

X10SLL-F

)

Form Factor	SKUs

= Most optimized Chassis for SuperServer Configuration
Blue color = Compatible
Green color = Global SKU & Compatible
Red dot & green color = Optimized + Global SKU

 

 

Server (Optimized for X10SLL-F)

• SYS-5038D-I
• SYS-5018D-MF